Frequently Asked Questions
3- IS THERE A STANDART DIMENSION FOR COLD ROOM DOORS?
- 75 cm weight*180 cm height
- 90 cm weight*190cm height
- 110 cm weight *190 cm height The models with these dimensions are manufactured by INOVA.
4- IS THERE ANY DOOR THAT MANUFACTURED WITHOUT STANDART DIMENSIONS?
The cold rooms are manufactured generally with standart dimensions. so this prevents high mold costs and labor cost. Thus provides more economical prices. If you want he doors with different dimensions we can provide also.
5- WHAT IS THE MEANING OF COLD ROOM WITH DOOR STEP AND WITHOUT DOOR STEP?
The cold room without door step is; if there is a equivalence between out corridor and room's inner height , we apply frames to theree edges of rooms( right-left-up). so this is the door withour door step.
- The trans palette - system and drift will easier on the door-steps.
- The door gaskets are on the left side - up side - right side and under the door there is mopboard gaskets. The higher of our units that the lower of inner units. So the door with door-step is prefered.
6- IN WHICH SITUATIONS THE HEATER IS USED?
- For preventing the freezing of door gaskets.
- For a better working of your doors.
* But the most important item about that topic ; the heater should be bound directly to city electric for less costs.
7- HOW THE OPENING ROTATES OF DOORS ARE DETERMINED?
- The first thing to determine to which rotate the door will open. This is for product -trans.
**the hinge is where, the door will open to there.
- The door opens to outside and locks from out. for preventing emergency situations we use phosohorous inner arms. - Only there is difference on 2 leaves sliding doors. The door which is manufactured only by us in Tukey ; one leave opens to right and other one opens to left.